Some examples and use cases from the internet:

Some examples and use cases from the internet:

• As soon as possible after cooling open the sample container and stir briefly (not longer than 10 seconds) with a suitable device, for example a spoon or spatula, before weighing.
• Add 2,5 ml of Carrez solution I (3.2) and stir for 30 seconds, then add 2,5 ml of Carrez solution II (3.3) and again stir for 30 seconds.
• Add to the water and stir to dissolve in a closed container.
• No, we just like to pour it into cups and stir it.
• Add 5 ml of Carrez solution I (3.2) and stir for approximately 30 seconds.
• Add 50 ml of 0,3 mol/l nitric acid (4.4) and stir again.
• Add 15 ml of water and stir so as to suspend the substance.
• Add 10 ml of distilled water at 40 ºC by a pipette (5.3) and stir with a magnetic stirrer (5.4) for 30 minutes in order to dissolve any lumps.

• Make up to the mark with methanol and mix.
• After ultrasonic treatment bring the solution to room temperature, make up to the mark with water and mix.
• Add 50 ml of ammonium bifluoride solution (4.3) and mix.
• Cover the beaker with a watchglass and mix.
• Heat the stoppered flask to 50 ºC and mix carefully till the PEDP dissolves.
• I can buy streamers and mix martinis as well as she can.
• Cover the beaker with a watch glass and mix.
• 3.1.3 Remove the syringe and needle and mix manually by repeated inversions until the powder is fully dissolved.