Some examples and use cases from the internet:

Some examples and use cases from the internet:

• It doesn't look like this phrase is very popular! The search could not find any examples on the internet.

• After thorough cleaning with water, the equipment used for the analysis must be thoroughly rinsed with methanolic hydrochloric acid (3.2.10) and then with deionized water before using.
• Prepare by adding carefully, while cooling, 400 ml of sulphuric acid (relative density at 20 ºC: 1,84) to 500 ml of distilled or deionized water.
• Distilled, deionized water can be added as needed.
• Add deionized water to the residue until a definite volume is obtained and determine the MBAS content in an aliquot as in Chapter 3.
• Double distilled water is the preferred eluent. Deionized water with a resistivity above 10 megohms/cm and total organic carbon content below 0,01 % can also be used.
• Withdraw 25 ml, transfer to a 500 ml graduated flask (3.2.13), dilute to the mark with deionized water and mix.
• Prepare by adding carefully, while cooling, 400 ml of sulphuric acid (relative density 1,84 at 20 ºC) to 500 ml of distilled or deionized water.
• It never occurred to me what the deionized water might be for.