Some examples and use cases from the internet:

Some examples and use cases from the internet:

• The flowrate range is subject to the following conditions:
• The values for the flowrate range shall fulfil the following conditions:
• ) and the transitional flowrate (Q
• The flowrate range of the gas shall fulfil at least the following conditions:
• It must be possible to measure the flowrate of each individual nozzle.
• The air flowrate (QSSV) at each restriction setting (minimum 16 settings) shall be calculated in standard m3/min from the flowmeter data using the manufacturer's prescribed method.
• whose maximum volumetric flowrate is not higher than 20L/h
• The highest flowrate at which the gas meter provides indications that satisfy the requirements regarding MPE.

• This coolant flow rate set point shall be used throughout testing.
• Adjustment of flow rate and tourniquet may be required to ensure leakage is stable (systemic level of radioactivity has reached a plateau) and does not exceed 10%.
• Characteristics (flow rate, etc.): ...
• The test must be rerun using a lower flow rate and/or a larger diameter filter.
• To monitor the flow rate through the analysers.
• The maximum flow rate is 8 ml/min in both directions.
• Daily volumetric flow rate of sewage Qd (m3/d): ...
• It is recommended that a flow rate of approximately 25 ml/hr be used.