Some examples and use cases from the internet:

Some examples and use cases from the internet:

• If a device has not detected all counterfeits contained in the test deck, the test result on the website will read: «not all».
• If devices or measures described in paragraph 3.1.2.1.4.2, can be used to control transmission operation for the purpose of achieving test requirements, calculate awot test using the equation:
• Not applicable if no device has been used.
• If the lighting device has no reflector, the definition of paragraph 2.9.2 shall be applied.
• If the device has not yet been registered, the importers should align with the conditions concerning the registration of the information related to the device identifier (static information).
• If the device has already been registered, importers should verify that the device identifier (static information) on the product corresponds to that in the UDI database.
• Data concerning the device that has been used for detecting the offence Not applicable if no device has been used.
• If a device has detected all counterfeits in the test deck, the test result on the website will read: «100 %».

• If a device has not detected all counterfeits contained in the test deck, the test result on the website will read: «not all».
• Not applicable if no device has been used.
• If the lighting device has no reflector, the definition of paragraph 2.9.2 shall be applied.
• The three colours green, orange and red immediately signal if the device status is good or if a warning or an error is active.
• If a device is provided to indicate that the alarm has been activated it should be marked as indicated in Annex Q to this TSI.
• If a device has detected all counterfeits in the test deck, the test result on the website will read: «100 %».
• If a device or implant is expected to have a lifecycle of say ten years, and problems occur after five years, in such a case, it must be possible to track the device/implant.
• If the device has already been registered, importers should verify that the device identifier (static information) on the product corresponds to that in the UDI database.