Some examples and use cases from the internet:

Some examples and use cases from the internet:

• If the truck has a multi
• The measurement distance shall be in minimum 3 m.
• gear transmission, select the gear that ensures the highest possible speed over the measurement distance
• The ultimate Fluke laser distance meter with measurement distance up to 100 m (330 ft).
• parallelepiped according to ISO 3744:1995 with measurement distance d = 1 m
• The measurement distance should be chosen appropriately, to make sure that the detector is located in the far field of the light distribution.
• The measurement distance between the lamp and photometer shall be sufficient to ensure that the detector surface is illuminated fully and uniformly without any structural detail of the light beam.
• This measurement distance shall be documented.

• The CBR detector should be placed on the same stage as the light detector and adjusted with the active end of it. So, the measured distance represents true distance from the source.
• That minimum measured distance shall be regarded as the ground clearance of the vehicle.
• Lateral tolerances are values indicating the amount a measured distance can vary.
• ±0.15% of measured distance for flexible probes >16.4 ft (5 m)
• The dimension value represents the actual distance, rather than the measured distance in the drawing.
• Lateral tolerances are values indicating the amount a measured distance can vary. You can control whether lateral tolerances are displayed and you can choose from several styles of lateral tolerances.
• The measured distance of the reflecting body from the sonar may be considered as the position of the body on the axis joining the sonar and the body, with the origin placed at the sonar position.
• The test determines whether and when the flame is extinguished, or the time the flame requires to travel over a measured distance.