Some examples and use cases from the internet:

Some examples and use cases from the internet:

• 29 PARTICULARS TO APPEAR ON THE OUTER PACKAGE Advocate spot
• 23 PARTICULARS TO APPEAR ON THE OUTER PACKAGE Advocate spot
• on solution for small cats Outer carton, pack size of 3, 4, 6, 21 and 42 pipettes.
• on solution for large cats Outer carton, pack size of 3, 4, 6, 21 and 42 pipettes.
• Size of outer mesh, and inner mesh where a liner is used.
• 26 PARTICULARS TO APPEAR ON THE OUTER PACKAGE Advocate spot
• on solution for small dogs Outer carton, pack size of 3, 4, 6, 21 and 42 pipettes.
• 20 PARTICULARS TO APPEAR ON THE OUTER PACKAGE Advocate spot

• The kinematic reference contour with its associated rules describes the outer dimensions of the unit; it shall be within one of the reference profiles GA, GB or GC (according to clause 4.2.2 of the CR INF TSI).
• 'type of vehicle with regard to installation of lighting' means vehicles which do not differ in such essential respects as the dimensions and outer shape of the vehicle, as well as the number, location and design characteristics of the installed lighting devices and light
• Essential outer front end dimensions means solid points in space of the test frame, representing all points of the actual intended vehicle type where the frontal protection system would be liable to impact on the vehicle during testing.
• |
• Set of rules including a reference contour and its associated calculation rules allowing definition of the outer dimensions of the vehicle and the space to be cleared by the infrastructure.
• The test may be carried out either with the frontal protection system mounted on a vehicle of the type for which it is intended or on a test frame closely representing the essential outer front end dimensions of the intended vehicle type.
• Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V(IEC 60719: 1992) | NONE |
• to the frame on which the system is mounted for testing and which is intended to represent the front end outer dimensions of the particular vehicle