Some examples and use cases from the internet:

Some examples and use cases from the internet:

• For vehicles of category L1e with a mass in running order <= 35 kg vehicle movement by its own propulsion system shall be inhibited as long as the connector of the battery charger is physically connected to the external electric power supply.
• Trailers equipped with an ISO 7638:2003 connector as defined above shall be marked in indelible form to indicate the functionality of the braking system when the ISO 7638:2003 connector is connected and disconnected [23].
• If the towed vehicle is equipped with an electrical connector as specified in point 2.1.5.1.3 of Annex I, this connector shall also be connected to the tractor simulator (see point 2. of Appendix 2).
• The connectors are designed as universal (unisex) system and can be connected any to any.
• The wiring harness may be represented only by the relevant connectors (connected to the tested components) and a length of wire.
• In the case of a trailer equipped with both an ISO 7638 connector and automated connector, the marking shall show that the ISO 7638 connector should not be connected when an automated connector is in use.
• The feedline is connected directly to the antenna, without losses by the connector.
• If the on

• The connectors are designed as universal (unisex) system and can be connected any to any.
• The wiring harness may be represented only by the relevant connectors (connected to the tested components) and a length of wire.
• The feedline is connected directly to the antenna, without losses by the connector.
• The connector is used in medical infusion sets.
• The fastening opens when the connector is attached to the syringe or infusion line and closes when it is removed, thus preventing the escape of liquid and the entry of air during the infusion.
• In the case of a trailer equipped with both an ISO 7638 connector and automated connector, the marking shall show that the ISO 7638 connector should not be connected when an automated connector is in use.
• Trailers equipped with an ISO 7638:2003 connector as defined above shall be marked in indelible form to indicate the functionality of the braking system when the ISO 7638:2003 connector is connected and disconnected [23].
• If the towed vehicle is equipped with an electrical connector as specified in point 2.1.5.1.3 of Annex I, this connector shall also be connected to the tractor simulator (see point 2. of Appendix 2).