Some examples and use cases from the internet:

Some examples and use cases from the internet:

• The voltages Vb, V1 and V2 of the high voltage buses shall be equal or less than 30 VAC or 60 VDC as specified in paragraph 2 of Annex 11.
• Traction units need standardisation of the voltage and frequency values.
• The voltages Vb, V1 and V2 of the high voltage buses shall be equal or less than 30 VAC or 60 VDC as specified in paragraph 2 of Annex 9.
• And all the voltage transfer limits are within material tolerance.
• All technical requirements affected by the voltage must be within the voltage range of ± 16 % of the rated figure.
• I was monitoring the voltage fluctuation in the trunk line directly.
• The voltage is too low and the amps...
• Exposed live parts having voltages to earth exceeding the voltage specified under 1.1 shall not be installed on the front of such switchboards.

• Exposed live parts having voltages to earth exceeding the voltage specified under 1.1 shall not be installed on the front of such switchboards.
• All technical requirements affected by the voltage must be within the voltage range of ± 16 % of the rated figure.
• The voltages Vb, V1 and V2 of the high voltage buses shall be equal or less than 30 VAC or 60 VDC as specified in paragraph 2 of Annex 9.
• I was monitoring the voltage fluctuation in the trunk line directly.
• an absence of voltage does not damage any train constituents,
• Traction units need standardisation of the voltage and frequency values.
• The voltages Vb, V1 and V2 of the high voltage buses shall be equal or less than 30 VAC or 60 VDC as specified in paragraph 2 of Annex 11.
• The voltage is too low and the amps...