Some examples and use cases from the internet:

Some examples and use cases from the internet:

• FCL does not allow an SFE who is qualified on the type to conduct the test to add an additional type to the SFI privileges.
• Unless the Commission is informed that a longer period is necessary to conduct the tests, the Member States shall ensure that this control is completed within 60 days of receipt of the samples.
• coordinating the activities of the laboratories whose task it is to conduct analyses to check the chemical or bacteriological standards and to conduct the tests provided for in this Directive,
• Such notice should be sufficient for NRA to conduct the technical replicability test and for access seekers to replicate the relevant retail offer in accordance with the parameters specified in Annex I.
• We're about to conduct the deep dive test.
• Unless the Commission is informed that a longer period is necessary to conduct the tests, Member States shall ensure that this control is completed within 60 days of receipt of the samples.
• Part
• Bodies authorised to conduct the variety tests referred to in Article 6

• Failure to achieve the qualifying mark in any of the tests will result in exclusion from the competition.
• A kneeling system may be used to achieve this test.
• The vehicle may, if necessary to achieve the test forces required in paragraph 3.1 below, be restrained by any method, this method to be specified by the vehicle manufacturer.
• The deflagration density (Ddef) needed to achieve ignition during the test may also be calculated as follows:
• If the test material is not soluble at the test concentration, special measures, such as the use of ultrasonic dispersion, may have to be employed to achieve good dispersion of test material.
• The vehicle may, if necessary to achieve the test forces required in paragraphs 2.8 and 14.4, be restrained by any method, this method to be specified by the vehicle manufacturer.
• the vehicle may, if necessary to achieve the test forces required, be restrained by any method specified by the vehicle manufacturer,
• It is the responsibility of the manufacturer to determine the correct manner of testing to achieve the required test speed and acceleration.