Some examples and use cases from the internet:

Some examples and use cases from the internet:

• The CO2 savings are to be calculated with the following formula:
• CO2 shall be calculated with the following formula:
• In such case, the GGE shall be calculated with the formula presented in the section on State aid here above or be aligned with the conditions of the Guarantee Notice.
• ? = absolute or dynamic viscosity of the gas, calculated with the following formula:
• The Re at the SSV throat is calculated with the following formula:
• Therefore, the amount calculated with the Standard Formula should be the difference between the amounts disclosed in C0040 and C0060.
• Where no test concerning tailpipe emissions is conducted in application of the provisions referred to in Entry 2, CO2 emissions and fuel consumption shall be calculated with the formula laid down in the explanatory notes (b) and (c).
• The resulting power savings are to be calculated with the following formula:

• The air density shall be calculated by the formula:
• For liquids carried under ambient conditions a could be calculated by the formula:
• This lead the Commission to consider that the State guarantee complied with point 25(d) of the Guidelines, i.e. that the aid was restricted to the amount calculated by the formula set out in the Guidelines' Annex.
• 6.3.2.1.1. The maximum intensity (IM) of the driving beam expressed in thousands of candelas shall be calculated by the formula:
• if test pieces of rectangular cross
• In these formulae, is the mean coefficient of cubical expansion of the liquid between 15 ºC and 50 ºC, i.e. for a maximum variation in temperature of 35 ºC.a is calculated by the formula:
• Alternatively, E* may be calculated by the formula:
• section are used, the gauge length l shall be calculated by the formula: