Some examples and use cases from the internet:

Some examples and use cases from the internet:

• The props shall be shaped at both ends as shown in the details on Figure 7.6.
• Dynamic pre
• Press the bottle adaptor into the neck of the bottle (as shown on figure below).
• loading of vehicles of category N2 with a gross vehicle mass exceeding 7,5 t and of category N3 (see P1 on figure 3).
• The props shall be shaped at both ends as shown in the details on Figure 6.13.
• The principal dimensions, based on figure 1 of this annex (reproduced below), are given in table 2.
• The principal dimensions of the side impact dummy, based on Figure 2 of this annex, are given in table 3 of this annex.
• Roof strength test (see P2 on figure 3)

• Using the apparatus described in figure 3b, the vapour pressure is read off directly.
• The burner is described in figure 3.
• For filling of the column the arrangement as represented in figure 1 is used.
• approval mark for light source is given in figure 4 of Appendix 5.
• The profile of the pantograph collector head is depicted in figure 4.1.
• Dimensions are given in figure 4.
• An example of an EC component type
• The shape and dimensions of samples are given in figure 6.